Q-See QSD6209C9--250 Especificações

9 hard drive, it will erase all the data recorded on the first hard drive. (5) SLAVE HDD SIZE: This shows the space available on the secondary hard d

10 5.8.2 Set time You can change year /date /hour / minute / second by using the SET TIME menu. 2007/11/11=year/month/day 17:50:01=hour/minute /secon

11 For Example: The hardware setup for the above screen is shown on the left. 5.8.5 PTZ Setup This DVR can control speed dome cameras (PTZ)

12 5.8.7 Password Enable When password enable is “ON” to stop recording or enter menu you will need password. If password enable is “OFF” there’

13 [NOTE]You need to adjust the IP ADDRESS, SUBNET MASK and GATEWAY value, only when the [STATIC] mode is used.

14 DNS ADDRESS: This should be provided by your local ISP if used. HTTP PORT: This port number is used t

15 DDNS SETUP DDNS PROVIDER DDNS USER NAME DONS PASSWORD DOMAIN NAME ( ) MOVE (SEL)SELECT (MENU) EXIT L

16 Accessing the DVR over a network To access the DVR through a computer you need to make sure the default gateway on the DVR is the same IP address a

17 5.10 Reset Menu Selecting “RESET MENU” will restore all to the factory default settings. Chapter 6: Recording 6. Record 6.1 Start Recor

18 [N-REC]: indicates the current record schedule is set as NO-RECORD mode. [39%]: indicates the percentage of hard drive space currently used. [M]:

1 Table of Contents Chapter 1: DVR Features ...

19 Chapter 7: Playback 7. Playback 7.1 Playback Control When you press the [PLAY] button the DVR goes into PLAY mode. When you press the MENU button

20 Chapter 8: USB Programming 8. USB Programming 8.1 Install 1. Place the USB Driver Program CD into your CD ROM. 2. If your CD ROM does not auto-r

21 1.PTZ Control 12.Back one frame 2.Zoom in, Zoom Out 13. Record 3.HDD Play Mode 14.stop 4.File Play Mode 15. pause 5.Net Play Mode 16. Play 6

22 Press (button 7) to configure the program’s local settings. Press (button 16) to play video.

23 Chapter 9: Specifications 9. Specifications 9.1 DVR Items Descriptions Video Standard NTSC, PAL Video Input/Output 9 Channels BNC/1 Channel BNC

24 Appendix Appendix 1) System connect sketch map 2) Accessories Included With DVR Combo

25 Q-SEE Product Warranty Thank you for choosing our products. All of our product users have a conditional free warranty repair service for hardware

26 Customer Information Card User’s Name Mr./Mrs. Company Name Postal Address Postal code Phone Number E-mail Model Number of Product Seri

2 Chapter 1: DVR Features l 9 BNC Camera Inputs，1 BNC Video Output l 1 channel Audio input，1 channel Audio output l Vi

3 2.2 Rear Panel 1. Fan 2. Audio input 3. Video output 4. CH4 5. CH3 6. CH2 7. CH1 8. VGA Port 9. LAN 10. Audio output 11. CH9 12. CH8 13.

4 Chapter 3: Installation 3. Install Fixed Hard Drive (Fig1) NOTICE: Do not remove HDD while DVR is running. I. Remove the DVR cover carefully. I

5 4.3 Format Hard Drive 4.4 Main Screen Chapter 5:DVR Setup (Main menu) （1）Press [MENU] to enter main menu. （2）Use [▲UP] and

6 5.1 Camera Setup This DVR system supports up to 9 cameras. You can configure which cameras are displayed or not displayed in real-time monitoring.

7 5.4 Video Quality There are four video quality settings, Highest \High\Normal\Low The higher the video quality, the clearer the image will be duri

8 H/W SENSOR SETUP CHANNEL-1 TYPE:NORMAL-OPEN CHANNEL-2 NOT INSTALLED CHANNEL-3 NOT INSTALLED CHANNEL-4 NOT