Q-See QCN8001D Manual do Utilizador descarregar pdf (Página 5)

8 9

CAMERA MOUNTING &

SPECIFICATIONS

CHAPTER 1

When installing your camera, it is important to select a proper site not only for ﬁeld of view, but

for other considerations as well:

Distance from viewing/recording device. The further the camera is from the NVR or power

source, the higher the chances of signal degradation. Typical 100Ω Ethernet Cable provides

acceptable signal at distances up to 330’ (100m). At greater distances, UL-Listed shielded

RG59 should be used. The camera’s power supply should be located as near to the camera

as possible when the distance exceeds 200’ as the power level will drop over extended

distances resulting in a decrease in video quality.

Do not place near high voltage wires or other sources of electrical interference. Electrical

interference will degrade the quality of the signal.

Place camera out of reach to avoid damage.

Avoid direct exposure to weather. Do not place the camera where rain or snow will hit the lens

directly nor should the camera be placed so that the sun or bright light shines directly into the

lens. Your camera is weatherproof, but it will not work when submerged in water. Ensure that

all power and video connections are not directly exposed to water and are protected from the

elements.

Do not place camera behind a window. If there is a light source behind the camera, it can cause

a reﬂection in the window that will obscure events on the other side of the glass. Likewise,

the camera’s infrared LEDs will reﬂect off the glass and shine into the lens, thus degrading the

image.

Light levels should be approximately the same between camera and target area. A camera in a

brightly-lit area looking into a shaded area, or vice versa, may produce inadequate results.

The above are guidelines and the optimal

location for your camera will depend on your

unique circumstances. As a general rule, the

locations highlighted in green in the picture to

the right indicate the best locations to mount

your camera. Both locations are sheltered

from rain or snow and offer good sight lines

to allow your camera to monitor a wide

area. Because your camera is weatherproof,

it requires less protection than weather-

resistant cameras and it can be placed in

more exposed locations if needed. Keep in

mind that this camera is designed to operate

between 14°F to 122°F (-10°C to 50°) with a

relative humidity of up to 95%) and consider

wind chill and other environmental factors

when selecting your location.

Your camera comes with both a ceiling and

wall mount. Where you locate your camera

will determine which mount you will need to

use. The mounting surface must be sturdy

and able to hold at least ﬁve times the

camera’s total weight.

PICTURE 1-1

1 2 3 4 5 6 7 8 9 10 ... 53 54

Comentários a estes Manuais

Sem comentários

Q-See QCN8001D Manual do Utilizador Página 5

Comentários a estes Manuais

Manuais e produtos relacionados com Câmaras de segurança Q-See QCN8001D